Sensor Switch WSXA PDT SA Occupancy and Daylighting Wall Switch Sensor Dual Technology On/Off Dimming Manual On/Automatic On

The WSXA Family of wall switch occupancy sensors provides simple and cost effective solutions for commercial and residential lighting control applications. All WSXA Family sensors have a stylish low profile appearance, soft-click buttons, and provide small motion detection up to 20 ft (6.10 m), making them perfect for private offices, private restrooms, closets, copy rooms, or any other small enclosed space.

Features

• Finish: White
• Type: Occupancy and Daylighting
• Detection Mode: Dual Technology
• Voltage: 120-277 VAC
• Dimming: On/Off
• Operating Mode: Manual On (default) or Automatic On
• Temp / Humidity: Standard
• Single Pole devices can be programmed with Sensor Switch VLP app or traditional push button programming
• 100% passive detection, no potential for interference with other building systems
• Small motion detection to up to 20 ft, Large motion detection up to 36ft
• Push-button programmable without removing cover plate – adjustable time delays & operating modes
• Dual technology (PDT) utilizes PIR/Microphonics detection (patented)
• Device accommodates powering over ground or neutral connection (patent pending)
• Fully meets NEC 2017 Section 404.2C neutral requirements – no current leakage to ground when connected to neutral
• Line power and load wires are interchangeable – impossible to wire backwards (patented)
• Integrated Photocell (disabled by default) prevents light from turning on if sufficient daylight is present
• New aesthetic with vandal resistant lens

Dimensions

• Width: 2.74″

• Height: 1.68″

• Depth: 1.63″

Warranty

• 5-Year Limited Warranty

Document

• Spec Sheet
• Instruction Sheet

Labels